Mercado Medic REAL 9500, Instructions For Assembly, Use & Care

20-07315-UK

-02

5

ARMRESTS

The armrests can be height and width-adjusted on each 
armrest U-bar . Loosen the knob to adjust the height (1) 
or width (2), set the desired width/height, and then lock 
the knob . 

PLEASE 

NOTE!

 Make sure that the armrest is adjusted in the 
bracket so that the spring button clip locks 
and the armrest cannot be pulled out .

BACKREST MECHANISM

The Medic back mechanism is available in a low and high design (illustrated chairs have low back) . The back 
mechanism has separate controls for height (1), angle (2) and depth (3), and the angle of the back itself is ad-
justed using the knob (4) .  
Loosen the knob, set the desired position for each adjustment and then lock the knob . 

PLEASE NOTE!

 Make sure that the Medic back recliner is adjusted in the bracket so that the spring but-
ton clip locks and the back recliner cannot be pulled out .

The Comfort back mechanism is available in a low and high design (illustrated chairs have a low back) . The back 
mechanism has separate controls for height (1) and angle of the backrest (2) . Loosen the knob, set the desired 
position for each adjustment (1) and (2), and then lock the knob . The angle of the back recliner is adjusted using 
the lever (3) . 

USER MANUAL

3

4

1

Medic

2

1

2

SEAT HEIGHT/LIFTING MECHANISMS

The height of REAL 9500 is adjusted manually using the lever (1) under one side of the armrest (standard right) . 
Lift the lever to adjust the height . On the REAL 9600 EL, the seat height is adjusted using the rocker switch (2) . 
The top part of the switch is pressed to raise the seat, and the bottom part of the switch is pressed to lower the 
seat . Control with paddle, pull the rocker up to raise and down to lower the seat .

Electrically controlled

2

Gas spring lever 

under armrest

1

1

2

3

4

Comfort (option)