background image

REAL 9700 Coxit

Chair designed for those with knee and hip disabilities. Also suitable for those with complete leg prostheses.

1

3

2

4

1

5

4

2

1

2

1

R

The REAL chair has exchangeable components, accessories and functions
and can be adjusted to suit individual needs. The chair should only be used
for that person and for the purpose for which it was originally intended. The
chair is designed for use indoors and should not be exposed to water or other
fluids or chemicals. Nor should it be exposed to high temperatures or long
term intensive sunlight or other such exposure. The chair may not be equipped
with other accessories or components than those approved by Mercado Medic
AB. Repairs and other technical adjustments may only be carried out by
personnel authorised by Mercado Medic AB. Please read through these
instructions carefully before using your chair.

1

INSTRUCTIONS for USE and CARE

Standard

Comfort

Medic

1

2

Backrest

Armrest

Sitting height

Rotation accessory

4

Articlenr: 087514022-E-9801

January 2003

The armrests can be adjusted up or down and from side to side on the
curve of the armrest. Loosen the knob to adjust the height (1) or the width
(2), and then tighten the knob again.

The height of the seat is adjusted using the lever (1) on one side of the
seat (standard right). Lift the lever to change the height. Note that light
people may need a little assistance to raise and lower their chair.

There are three types of back mechanisms: Standard, Medic and Comfort. The backrest is available in both
a low and a high design (all the chairs illustrated show the high backrest design). All back mechanisms have
separate adjustment controls for height (1) and angle (2). Loosen the knob, adjust to the desired height/angle
and then lock the knob. On the Comfort model with a gas spring device, push the lever forward to change
the angle. On the Medic model the depth can be adjusted by using the knob (3). In the high position the angle
of the backrest itself can be adjusted by using the knob. (4). The Comfort model has a knob (5) for adjusting
the angle of the backrest in both positions.

Chairs equipped with a rotation device can be manoeuvred using the knob.
Turn clockwise to release and anti-clockwise to lock the device. Please
note! Rotation should be in the locked position when you sit down and stand
up from your chair.

Reviews: