Set Emergency Contacts/Turn Off Outgoing Calls
The device can have up to 10 emergency contact numbers programmed (1 minimum).
Cell phone numbers are recommended as SMS and location data can be received when the SOS button
has been activated. Landlines & international can be programmed if desired.
SMS Command
(Send the device the following SMS)
A1,1,0, 1st contact number (Example—A1,1,0,02123456789) No Gaps. The device will respond back
‘
Set
contact number 1 OK
A2,1,0, 2nd contact number
A3,1,0, 3rd contact number
A4,1,0, 4th contact number
A5,1,0, 5th contact number
A6,1,0, 6th contact number
A7,1,0, 7th contact number
A8,1,0, 8th contact number
A9,1,0, 9th contact number
A10,1,0, 10th contact number
If you wish to change any number at any time, simply repeat the command in the A1
-
10 slot as required.
To check contact numbers set
SMS Command
A?
This will reply with numbers that have programmed.
NOTE: Programming instructions above are recommended and sets the device to only SMS the emergen-
cy contacts during activation. This stops all outgoing call functions providing a clean phone line, allowing a
first responder to call into the device immediately to render assistance.
Set Device Name
Sets the Name of the device for SMS/Tracking
SMS Command
Prefix1,johnsmith
The device will reply with—Set Johnsmith ok. Up to 100 Characters can be used for the name descrip-
tion.
