X
Vehicles without Memory function*: if nec-
essary, move the driver's or front-
passenger seat forwards.
X
Pull the left-hand or right-hand release han-
dle at the rear in load compartment
:
or
at the side beside backrests
;
.
The corresponding backrest folds for-
wards.
X
If necessary, move the driver's or front-
passenger seat back.
Folding back the rear seat backrest
X
If necessary, move the driver's or front-
passenger seat forward.
!
Make sure that the seat belt does not
become trapped when folding the rear seat
backrest back. Otherwise, it could be dam-
aged.
X
Fold seat backrest
:
back until it engages.
G
Risk of injury
Make sure that the rear seat backrest is cor-
rectly engaged in position. Otherwise, vehicle
occupants could be injured by objects being
thrown around if you:
R
brake sharply
R
change direction suddenly
R
are involved in an accident
If the rear seat backrest is not engaged, it will
appear in the multi-function display in the
instrument cluster.
X
Adjust the head restraints if necessary
(
Y
page 79).
X
If necessary, move the driver's or front-
passenger seat back.
Securing a load
Plastic hooks (Saloon)
On vehicles without a through-loading feature
in the rear bench seat*, four plastic hooks are
fitted to the boot floor. You can use these to
attach the luggage securing feature, which is
available as an accessory.
Lashing eyelets*
G
Risk of injury
Distribute the load on the lashing eyelets
evenly.
Loading and stowing
197
Controls
* optional
212_AKB; 2; 4, en-GB
mkalafa,
Version: 2.11.8.1
2009-05-05T14:17:16+02:00 - Seite 197
Z
Dateiname: 6515346702_buchblock.pdf; erzeugt am 07. May 2009 14:16:41; WK
