X
To open: turn rotary catch
:
90° in the
direction of the arrow and remove side trim
panel
;
.
X
To close: insert side trim panel
;
and turn
rotary catch
:
90° in the opposite direc-
tion to the arrow.
Tail lamps
X
Switch off the lights.
X
Open the boot.
X
X
Remove the tail lamp connector
X
Simultaneously press retaining lugs
:
in
the direction of the arrow and slightly pull
out the bulb holder with the bulbs.
X
Remove the connector for LED light func-
tions from the top of the bulb holder.
X
Pull the bulb holder out with the bulbs.
:
Reversing lamp
;
Brake lamp
=
Side lamp/brake lamp
X
Press the respective bulb
:
,
;
or
=
back
and turn it anti-clockwise to remove it from
the bulb holder.
X
Insert the new bulb into the bulb holder and
turn it clockwise.
X
Reinsert the connector for LED light func-
tions in the bulb holder.
X
Insert the bulb holder again and lock it in
place.
X
Insert the tail lamp connector.
X
Close the side trim panel (
Windscreen wipers
Switching the windscreen wipers on/
off
!
Do not operate the windscreen wipers
when the windscreen is dry, as this could
damage the wiper blades. Moreover, dust
that has collected on the windscreen can
scratch the glass if wiping takes place when
the windscreen is dry.
!
If the windscreen wipers leave smears on
the windscreen after the vehicle has been
washed in an automatic car wash, this may
be due to wax or other residue. Clean the
windscreen with washer fluid after an auto-
matic car wash.
Combination switch
1
$
Windscreen wipers off
2
Ä
Intermittent wipe, low
5
5
Rain sensor set to low sensitivity.
Windscreen wipers
129
Lights and windscreen wipers
Z
Summary of Contents for 2013 C-Class Coupe
