wheel. In addition, a lane with lane markings
on both sides must be recognised.
In the case of a broken lane marking being
detected, a lane-correcting brake application
can only be made if a vehicle has been detec-
ted in the adjacent lane. Oncoming vehicles,
overtaking vehicles and vehicles in adjacent
lanes can be detected.
i
A further lane-correcting brake applica-
tion can only occur after your vehicle has
returned to the original lane.
No lane-correcting brake application occurs
if:
R
you clearly and actively steer, brake or
accelerate.
R
you cut the corner on a sharp bend.
R
you have switched on the turn signal.
R
a driving safety system intervenes, such as
ESP
®
, PRE-SAFE
®
Brake or Active Blind
Spot Assist.
R
you have adopted a sporty driving style with
high cornering speeds or high rates of
acceleration.
R
ESP
®
is deactivated.
R
the transmission is not in position D.
R
on vehicles with a trailer tow hitch, the
electrical connection to the trailer has been
correctly established.
R
a loss of tyre pressure or a defective tyre
has been detected and displayed.
R
an obstacle in the lane in which you are
driving has been detected.
Active Lane Keeping Assist may not detect
other road users or traffic situations. An inap-
propriate brake application may be interrup-
ted at any time if:
R
you steer slightly in the opposite direction.
R
you switch on the turn signal.
R
you clearly brake or accelerate.
A lane-correcting brake application is inter-
rupted automatically if:
R
a driving safety system intervenes, such as
ESP
®
, PRE-SAFE
®
Brake or Active Blind
Spot Assist.
R
lane markings are no longer be detected.
Activating Active Lane Keeping Assist
X
Press button
;
.
Indicator lamp
:
lights up. The
Lane
Lane
Keeping Assist on
Keeping Assist on
message appears in
the multifunction display. If all conditions
have been satisfied, a warning or steering
intervention may be made.
X
To switch off: press button
;
.
Indicator lamp
:
goes out. The Active
Lane Keeping Assist is deactivated. The
Lane Keeping Assist off
Lane Keeping Assist off
message
appears in the multifunction display.
Selecting Standard or Adaptive setting
X
Select the
Active Lane Keeping
Active Lane Keeping
Assist
Assist
function in the
Assistance
Assistance
menu
using the on-board computer
(
Y
page 314).
X
Select the
Standard
Standard
or
Adaptive
Adaptive
setting.
When
Standard
Standard
is selected, no warning
vibration occurs if:
R
you have switched on the turn signals. In
this event, the warnings are suppressed
for a certain period of time.
R
a driving safety system intervenes, such
as ABS, BAS or ESP
®
.
When
Adaptive
Adaptive
is selected, no warning
vibration occurs if:
Driving systems
277
Drivin
g
and
pa
rk
ing
Z
Summary of Contents for 2013 S-CLASS
