!
Please note the care instructions in the
trailer coupling manufacturer's operating
instructions.
The ball coupling must be cleaned if it
becomes dirty or corroded.
X
Remove rust on the ball, e.g. with a wire
brush.
X
Remove dirt with a clean, lint-free cloth or
a brush.
X
After cleaning, lightly oil or grease the ball
coupling.
X
Check that the vehicle's trailer tow hitch is
working properly.
i
You can also have the maintenance work
on the ball coupling and the trailer tow hitch
carried out by a qualified specialist work-
shop.
Interior care
Cleaning the display
!
For cleaning, do not use any of the fol-
lowing:
R
alcohol-based thinner or petrol
R
abrasive cleaning agents
R
commercially-available household clean-
ing agents
These may damage the display surface. Do
not put pressure on the display surface
when cleaning. This could lead to irrepara-
ble damage to the display.
X
Before cleaning the display, make sure that
it is switched off and has cooled down.
X
Clean the display surface using a commer-
cially available microfibre cloth and TFT/
LCD display cleaner.
X
Dry the display surface using a dry micro-
fibre cloth.
Cleaning Night and Day View Assist
Cleaning the camera behind the wind-
screen
!
Never clean the camera lens. When clean-
ing the field of vision of the driving systems,
make sure that you do not spray glass
cleaner on the camera lens. If the camera
lens is dirty, visit a qualified specialist work-
shop.
X
Fold down the camera cover by recess
:
.
X
Use a soft cloth to clean the windscreen in
front of camera
;
.
412
Care
Maintenance
and
care
Summary of Contents for 2013 S-CLASS
