HOLD function
General notes
The HOLD function can assist the driver in the
following situations:
R
when pulling away, especially on steep
slopes
R
when maneuvering on steep slopes
R
when waiting in traffic
The vehicle is kept stationary without the
driver having to depress the brake pedal.
The braking effect is canceled and the HOLD
function deactivated when you depress the
accelerator pedal to pull away.
Important safety notes
G
WARNING
When leaving the vehicle, it can still roll away
despite being braked by the HOLD function if:
R
there is a malfunction in the system or in
the voltage supply.
R
the HOLD function has been deactivated by
pressing the accelerator pedal or the brake
pedal, e.g. by a vehicle occupant.
R
the electrical system in the engine com-
partment, the battery or the fuses have
been tampered with.
R
the battery is disconnected
There is a risk of an accident.
If you wish to exit the vehicle, always turn off
the HOLD function and secure the vehicle
against rolling away.
!
If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes automati-
cally in certain situations. To prevent dam-
age to the vehicle, deactivate DISTRONIC
PLUS and the HOLD function in the follow-
ing or other similar situations:
R
when towing the vehicle
R
in the car wash
Deactivating the HOLD function
(
Y
page 181).
Activation conditions
You can activate the HOLD function if:
R
the vehicle is stationary
R
the engine is running or if it has been auto-
matically switched off by the ECO start/
stop function
R
the driver's door is closed or your seat belt
is fastened
R
the hood is closed
R
the electric parking brake is released
R
the selector lever is in position D, R or N on
vehicles with automatic transmission
R
DISTRONIC PLUS is deactivated
Activating the HOLD function
X
Make sure that the activation conditions
are met.
X
Depress the brake pedal.
X
Quickly depress the brake pedal further
until
:
HOLD
HOLD
appears in the multifunction
display.
The HOLD function is activated. You can
release the brake pedal.
i
If depressing the brake pedal the first
time does not activate the HOLD function,
wait briefly and then try again.
Deactivating the HOLD function
The HOLD function is deactivated automati-
cally if:
R
you accelerate. On vehicles with automatic
transmission: only when the transmission
is in position D or R.
R
you shift the transmission to position P on
vehicles with automatic transmission.
Driving systems
181
Driving
and
parking
Z
Summary of Contents for 2015 SLK
