Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 162 / 222

Adding to bookmarks

Adds the current website to the favorites. The

website can then be called up using the menu.

You can store up to 20 favorites in the menu.

To show the menu: press the

but-

ton.

To select

: turn and press the control-

ler.

Select

Add to Bookmarks

The message:

The website was added

to bookmarks

appears.

Current URL

To show the menu: press the

but-

ton.

To select

: turn and press the control-

ler.

Select

Current URL

The URL appears.

Zoom

You can use this function to enlarge web

pages.

To show the menu: press the

but-

ton.

To select

: turn and press the control-

ler.

A menu appears. The

dot indicates the

current setting.

Select

Zoom

To navigate on the web page: slide

the controller.

To zoom in on the web page: turn the con-

troller.

Jumping from link to link

You can use this function to skip from one link

to the next on a website.

To show the menu: press the

but-

ton.

To select

: turn and press the control-

ler.

A menu appears. The

dot indicates the

current setting.

Select

Jump From Link To Link

If a website has been called up and the

controller is turned, the cursor jumps from

link to link.

Directional scrolling

You can use this function to scroll up and

down on the web page.

To show the menu: press the

but-

ton.

To select

: turn and press the control-

ler.

A menu appears. The

dot indicates the

current setting.

Select

Directional Scrolling

If a website has been called up and the

controller is turned, the cursor moves up or

down depending on the direction of the

turn.

Settings

Overview

160

Web browser

Online

and

Internet

functions

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands