17
Notes
If there is a connection between the telepho-
ne module and the mobile phone, incoming
text messages (SMS) will be saved on the
mobile phone's SIM card. In vehicles equip-
ped with Audio 20, the text messages can-
not be read in the multi-function display.
For more detailed information about acces-
sing saved text messages on Nokia mobile
phones, please refer to the additional infor-
mation entitled "Tips On How to Use and
Make Settings for Different Mobile Phones".
It is not possible to make any changes to the
SIM card settings (e.g. call forwarding, call
waiting, SMS parameters, etc.) on the tele-
phone module. To change the SIM card set-
tings, the SIM card must be taken out of the
telephone module and inserted into a mobile
phone.
Depending on the type of mobile phone you
are using, a display appears on the mobile
phone's screen indicating SIM card access
via COMAND or the audio system. In this mo-
de, the telephone may only be used via the
hands-free system.
A call can also be accepted by picking up the
receiver.
Once the receiver has been picked up, the
volume cannot be adjusted and the mute
function cannot be activated via the multi-
function steering wheel. The volume can
then only be regulated using the volume con-
trol on COMAND or the audio system.
18
Searching for and connecting other tele-
phones
The telephone module always searches for
the most recently connected mobile phone
and connects it automatically. Connecting a
different mobile phone with the telephone
module is only possible when there is no ac-
tive Bluetooth
®
connection.
Connecting a different paired mobile
phone
1.
Disconnect any existing connections to
a mobile phone (see
2.
Briefly press the thumbwheel (8) on the
receiver (6) without turning it. The LED (9)
flashes slowly and a message appears in the
COMAND or audio system display indicating
that the telephone is being activated. The te-
lephone module always searches for and
connects the previously paired mobile pho-
ne.
6
8
9
M+P-03F-6901
19
Downloading the phone book
To use the phone book stored on the mobile
phone via the hands-free system, it must be
downloaded to COMAND or the audio sys-
tem. The mobile phone must be logged-on to
the mobile network for this procedure. The
download can take up to 10 minutes, depen-
ding on the size of the phone book, and will
be indicated by a symbol on the display of
the mobile phone.
Please wait
appears in
the COMAND, audio system or multi-func-
tion display, depending on the vehicle.
1.
Enter
0000
on COMAND or the audio
system.
The phone book is downloaded and a mes-
sage appears in the COMAND or multi-func-
tion display. A SIM PIN number query or the
phone menu (for deactivated SIM PIN) ap-
pears after the phone book download has
been completed.
2.
If the SIM PIN number is activated, en-
ter this on COMAND or the audio system and
confirm.
Notes
The phone book of the previously connected
mobile phone remains stored in the telepho-
ne module. Only the SIM card phone book of
the newly connected mobile phone can be
accessed. To access the mobile phone tele-
phone book, it must first be downloaded to
the telephone module.
The phone book of the previously connected
mobile phone is deleted if the phone book of
the newly connected mobile phone is down-
loaded. Only one phone book can be stored
in the telephone module.
20
Depending on the operating system, 250,
650 or 999 phone book entries can be down-
loaded to COMAND or the audio system.
Therefore, some phone book entries may not
be shown on the operating system.
During an active Bluetooth
®
connection,
phone book entries on the SIM card can be
read, and deleted if necessary.
21
Disconnecting the telephone module
from the mobile phone
Automatic disconnection
Once the mobile phone is out of the telepho-
ne module's range, the mobile phone is au-
tomatically disconnected.
Manual disconnection
The Bluetooth
®
connection can be manually
disconnected as follows:
For S-Class vehicles, model series 221, and
CL-Class vehicles, model series 216:
1.
Using the COMAND controller, select
"
Telephone
“
씮
"
Telephone off
“.
For all other vehicle model series:
1.
Press and hold the
button for ap-
prox. 3 seconds on COMAND or the audio
system.
On the mobile phone: Please refer to the mo-
bile phone operating instructions.
22
Telephone module in SIM card mode
Note
The telephone module can also be used as a
SIM card telephone. Once a SIM card is in-
serted into the telephone module, an exis-
ting Bluetooth
®
connection is disconnected.
It is not possible to establish a Bluetooth
®
connection to the mobile phone.
Inserting and removing a SIM card
1.
Lift the receiver (3) (see
).
2.
Open the cover (10) below the recei-
ver's earpiece (6), slide the SIM card
holder (11) towards the right and flip it up.
3.
Slide the SIM card (12) into place as
shown in the illustration, flip the SIM card
holder (11) down and slide it towards the left
until it engages into place. Close the
cover (10).
Follow the same procedure to remove the
SIM card.
M+P-03F-6902
11
10
6
12
