Preparation
8
Telephone Module with Bluetooth® (SAP profile)
X
Select
Connect MB SAP module
.
or
Select
Activate MB SAP module
.
The following message is displayed:
To
connect your MB SAP module, please
ensure that it is connected and
activated.
X
Press and hold button
2
.
Indicator lamp
1
lights up in white.
X
Release the button as soon as indicator
lamp
1
flashes yellow.
X
Select
Start search
.
The
Searching for an active MB SAP
module...
message appears.
If the module has been located and the
connection has been established, the
COMAND device list
or „SAP phone
search“ is displayed.
MB SAP module phones
is highlighted.
The module is now activated and
connected in COMAND Online.
If no module has been located repeat the
process. Ensure that the module is fitted
correctly and that indicator lamp
1
on the
module is flashing yellow.
You can activate the telephone module on up
to eight vehicles with COMAND Online/audio
system. The settings will remain stored in the
telephone module.
Activating and connecting the
telephone module
For first-time use with a mobile phone, the
mobile phone must be activated on the
telephone module. After this initial activation,
the two devices will be connected
automatically in the vehicle with every
startup.
X
Press the
%
button repeatedly until the
basic telephone menu appears, then select
Telephone
.
X
Fit the telephone module (
N
X
Switch to the menu bar: slide
mr
the
controller.
X
For first-time activation: Select
Activate
MB SAP module
.
X
Select
Connect device
or
Connect MB
SAP module
.
X
Depending on vehicle equipment, select
COMAND phone
or
Business phone
.
The
COMAND device list
appears.
X
For first-time activation: Select
Activate
MB SAP module
.
X
Select
Connect MB SAP module
.
The following message is displayed:
To
connect your MB SAP module, please
ensure that it is connected and
activated.
X
Press and hold button
2
.
Indicator lamp
1
lights up in white.
