Preparation
10
Telephone Module with Bluetooth® (SAP profile)
X
Select
Connect MB SAP module
.
The following message is displayed:
To
connect your MB SAP module, please
ensure that it is connected and
activated.
X
Select
Start search
.
The
Searching for an active MB SAP
module...
message appears.
When the module has been located and
connected, the
MB SAP module
connection successful
message
appears.
An authorisation menu appears for the
mobile phone. Further information on
authorisation (
N
Telephone module in SIM card
operation
Use the telephone module as a SIM card
telephone if:
^
your mobile phone is not compatible
^
you own a separate SIM card
In SIM card operation, a Bluetooth
®
connection to your mobile phone is not
possible.
X
To insert: with the contact area facing
down, insert SIM card
1
into the SIM card
slot until it engages.
X
To remove: push SIM card
1
and then
release.
Authorising a mobile phone
General notes
When you use you mobile phone with the
telephone module and COMAND/the audio
system for the first time, you must first
search for the mobile phone and authorise it.
If your mobile phone is already authorised,
the most recently connected mobile phone is
found and automatically connected.
You can authorise a maximum of 15 mobile
phones. The Bluetooth telephone list
indicates the currently connected mobile
phone with a dot
#
.
You can adjust your settings so that the
mobile phone PIN is saved to the telephone
module (
N
Requirements
You can authorise and connect your mobile
phone on the telephone module if:
^
the module is fitted (
N
activated in COMAND/audio system
(
N
^
there is no SIM card inserted in the
telephone module (
N
^
the mobile phone is not actively connected
to another device via Bluetooth
®
^
the mobile phone supports the SAP (SIM
Access Profile) Bluetooth
®
profile.
For checking and changing additional mobile
phone settings, see the operating
instructions of the mobile phone:
^
Bluetooth
®
must be active on the mobile
phone and visibility must be activated for
other devices.
^
The mobile phone's SAP Bluetooth
®
profile
must be activated.
^
You must know your mobile phone's
Bluetooth
®
name.
