Preparation
12
Telephone Module with Bluetooth® (SAP profile)
X
If a mobile phone is connected and the
telephone module is registered online:
Call „0001“.
If an existing Bluetooth connection has
been severed because button 2 has been
pressed, the telephone module then
registers itself again.
X
As soon as the Bluetooth
®
connection is
available, select the list of dialled numbers,
see separate operating instructions.
Procedure for vehicles with system
variant B
X
Select the „CONNECT PHONE“ text
message and call the number of the
sender.
or
X
If only the telephone number of the
received text message appears: Select
Options
/
Display text
and call the
sender.
The telephone module searches for SAP
phones.
X
Once the search is complete, select the
text message function.
X
Select the text message for the mobile
phone which you intend to authorise and
open it. A phone number is displayed. This
is also the 16-digit PIN.
X
Select the displayed PIN and then select
Call sender
and confirm your selection.
X
When requested, enter the displayed PIN
into the mobile phone within the 20 second
time limit. If the authorisation is successful,
a tone with an ascending melody sounds.
X
Depending on the mobile phone you are
using, it may be necessary to confirm the
telephone module's connection request on
the mobile phone.
For the purposes of the telephone
module's connection request, the mobile
phone must be set to „automatic“/
„authorised yes“, see the operating
instructions of the mobile phone.
X
If necessary, enter the SIM card PIN into
COMAND Online/audio system and
confirm.
Procedure for vehicles with system
variant C
X
In the call list, select and dial the
CONNECT
PHONE
entry.
The telephone module searches for SAP
phones.
X
Once the search is complete, select the call
list again.
X
In the call list, select the number of the
mobile phone you intend to authorise. The
displayed number is also the 16-digit PIN.
If more than ten mobile phones are found,
search through the call list in the following
order:
^
recently dialled numbers
^
missed calls
^
received calls
If the phone number is not displayed in its
entirety, press the NUM button on the
audio system and switch to the
multifunction display.
X
Make a note of the 16-digit PIN.
X
Call the displayed phone number.
X
When requested, enter the displayed PIN
into the mobile phone within the 20 second
time limit. If the authorisation is successful,
a tone with an ascending melody is
sounded.
X
Depending on the mobile phone you are
using, it may be necessary to confirm the
telephone module's connection request on
the mobile phone.
For the purposes of the telephone
module's connection request, the mobile
phone must be set to „automatic“/
„authorised yes“, see the operating
instructions of the mobile phone.
X
If necessary, enter the SIM card PIN into
COMAND and confirm it.
