Usage
18
Telephone Module with Bluetooth® (SAP profile)
Transferring the phone book
In order to use the mobile phone's phone
book via COMAND/audio system, the phone
book must be transferred to the telephone
module.
The data transfer can take up to 10 minutes.
The transfer takes place automatically after
the automatic initiation a Bluetooth
®
connection.
X
If the phone book transfer does not
start automatically:
select Telephone in
COMAND/the audio system.
X
Select
Import contacts
.
X
Select
From mobile phone
.
If the mobile phone supports PBAP (Phone
Book Access Profile), the system will initially
attempt to load the phone book entries
stored in the telephone's memory. If there
are no phone book entries in the telephone
memory, the SIM card's phone book entries
are loaded instead.
Speed dial buttons
Speed dial buttons for voice mail
Speed dial buttons for system variant A
(COMAND Online)
You can define speed-dial buttons using
numbers of your choosing, see operating
instructions for COMAND Online/audio
system.
Speed-dial buttons for system variant B
and C)
You can use the
j
button as a speed-dial
button for your voice mail.
X
To set speed-dial buttons:
create the
following entry in the phone book of the
mobile phone, see the operating
instructions of the mobile phone:
Name: VOICE MAIL
Telephone number: number of the voice
mail.
X
Transfer the phone book of the mobile
phone to COMAND/the audio system
(
N
SMS (text messages)
General notes
You can send, receive
1
and delete text
messages.
Only a limited number of text messages can
be saved to the SIM card. When the SIM card
memory is full, you must first delete text
messages before new ones can be received.
Requirement
The telephone module must be connected to
the mobile phone (
N
card mode (
N
Special considerations for system
variant A (COMAND Online)
^
The Bluetooth
®
SAP profile only has access
to the text message memory of the SIM
card.
^
The Bluetooth
®
SAP profile saves incoming
text messages to the SIM card.
^
Depending on the model of the mobile
phone, text messages may not be visible.
Select a text message, see the operating
instructions of the mobile phone.
^
If the mobile phone supports the MAP
(Message Access Profile) Bluetooth
®
profile, the telephone downloads the text
messages saved to the mobile phone.
When this function is activated in COMAND
Online, the text messages are transferred.
^
The text messages saved to the SIM card
are given the designation „SIM:“.
^
You can delete text messages from the SIM
card via COMAND Online, see the
COMAND Online operating instructions.
1 Not available for all systems.
