Deactivating the telephone module
20
Telephone Module with Bluetooth® (SAP profile)
Deactivating the telephone module
Deactivate the telephone module in
COMAND when it is not being used.
The telephone module can and must only be
deactivated if the vehicle is equipped with
system variant A.
X
Remove the telephone module
(
N
X
Press the
%
button repeatedly until
the basic telephone menu appears, then
select
Telephone
.
X
Select
Connect device
.
If your vehicle is equipped with MB
business telephony, you can choose
between using the module as a
COMAND
phone
or a
Business phone
.
X
Depending on the current connection to
the telephone module, select
COMAND
phone
or
Business phone
.
X
Select the
MB SAP module phones
menu.
X
Select the list symbol on the right beside
Activate MB SAP module
.
X
To deactivate the telephone module, select
Disconnect MB SAP module
and confirm
your selection with
Yes
.
The module is deactivated.
Declaration of conformity
The wireless components of the telephone
module with Bluetooth
®
(SAP profile) comply
with the basic requirements and all other
relevant provisions of Directive 2014/53/
EU. The complete text of the EU declaration
of conformity can be found on the following
page.
You can obtain further information from any
Mercedes-Benz Service Centre.
Frequency overview
Frequency range
Technology
Transmission
output
Band 1 (1920 MHz - 1980 MHz)
UMTS/WCDMA/3G mobile
phone frequency
≤
23 dBm/200 mW
Band 8 (880 MHz - 915 MHz)
UMTS/WCDMA/3G mobile
phone frequency
≤
23 dBm/200 mW
GSM850 (824 MHz - 849 MHz)
GSM/2G mobile phone
frequency
≤
33 dBm/2 W
GSM900 (876 MHz - 915 MHz)
GSM/2G mobile phone
frequency
≤
33 dBm/2 W
GSM1800 (1710 MHz - 1785 MHz) GSM/2G mobile phone
frequency
≤
30 dBm/1 W
GSM1900 (1850 MHz - 1910 MHz) GSM/2G mobile phone
frequency
≤
30 dBm/1 W
ISM 2.4 GHz
Bluetooth
®
≤
3 dBm/2 mW
