background image

Introduction

4

Operating safety

The telephone module can become very hot 
when the outside temperature is high.
Do not open the bracket and do not attempt 
to make modifications to the telephone 
module. The operating permit will otherwise 
be rendered invalid.

Qualified specialist workshops

A qualified specialist workshop has the 
necessary professional expertise, tools and 
qualifications for performing the required 
work on the telephone module.
A qualified specialist workshop must perform 
service, maintenance and repair work in line 
with Daimler AG regulations, and must 
document this work accordingly. If these 
requirements are not observed, warranty 
claims may be rendered void.
Only have warranty-based and ex gratia work 
carried out in authorised workshops/Service 
Centres.
Mercedes-Benz recommends that you use a 
Mercedes-Benz Service Centre.

Scope of delivery

The following components make up the 
scope of delivery:

^

Mercedes-Benz telephone module with 
Bluetooth

®

 (SAP profile)

^

Supplement

Validity of the Supplement

This Supplement is valid for vehicles with:

^

Basic fitting for mobile phone with 
interface (convenience telephony), 
code 386

^

Telephone module with Bluetooth

®

 (SAP 

profile), code 379.

WARNING

When operating mobile communications 
equipment in the vehicle, observe the legal 
regulations of the country you are currently 
in.
If it is permitted by law to operate mobile 
communications equipment while the 
vehicle is in motion, you may still only do so 
if traffic conditions permit this. You could 
otherwise be distracted from traffic 
conditions and lose control of the vehicle, 
potentially injuring yourself and others.
Two-way radios or fax machines without 
low-reflection exterior aerials may interfere 
with the vehicle's electronics, thereby 
jeopardising the operating safety of the 
vehicle and your own safety. For this 
reason, only use such equipment if it is 
properly connected to a separate, low-
reflection exterior aerial.

Summary of Contents for 6515 6959 00























Reviews: