Mercedes-Benz A0009060307, Instruction Manual

4

Introduction

Thank you for choosing this wallbox to charge your Mercedes Benz electric vehicle. With this Mercedes-Benz Wallbox, you 
have decided on an innovative and future proof solution.

eMobility helps save natural resources and protect the environment sustainably – e.g. with Electric Drive models by Mer-
cedes-Benz. The Mercedes-Benz Wallbox combines progressive and pleasing design with intuitive functionality: According to 
their requirements, users may select from models with charging socket or fixed charging cable, which are designed for domes-
tic and also for semi-public applications.

Mercedes-Benz Wallboxes are manufactured in Germany and comply with the regulations and norms for the charging of elec-
tric vehicles applicable throughout Europe according to IEC 61851-1, Mode 3. Please refer also to the section on “Standards 
& guidelines” on page 12.

Introducing the product

Your Mercedes-Benz Wallbox allows you to comfortably and safely charge electric vehicles according to IEC 61851-1, Mode 3 
and is designed for the shortest possible charging times.

We place the highest value on user safety in all our products. For this purpose, your wallbox offers integrated DC fault current 
detection which, in combination with the protective measures of your domestic power supply and your electric vehicle effec-
tively protects from short circuit, electric shock and other operational hazards.

The wallbox is especially easy to operate during everyday use: Three LED lights in the lower part of the housing cover allow 
you to check the current operating status at any time. Should a malfunction occur, you can identify the cause by its specific 
LED error code without having to open the housing. After being taken into operation by a specialist contractor, the Mercedes-
Benz Wallbox is ready for charging at any time, while each charging process must be separately authorized via the integrated 
key switch. 

A common characteristic of all wallboxes is the space-saving housing, which effectively protects the internal electric circuits 
against environmental influences and unauthorized access. In principle, all model variants of the wallbox must be installed and 
taken into operation by a specialist electrical contractor. Please contact your local Mercedes-Benz partner with any queries 
you may have.

Unpacking and components included

Your Mercedes-Benz Wallbox is delivered in an extremely sturdy carton, including a range of accessory components required 
for proper operation. Therefore, please check immediately after unpacking whether the following components are included:

Component

Quantity

Description

Wallbox

1

Charging station, consisting of plastic housing with lockable cover and separate mounting plate.

Quick start guide

1

Quick start guide including safety notices in printed form

Installation kit

1

Set of fixings for wall mounting, consisting of 2 x 4 screws as well as matching wall plugs, triangular key, key for the 
key switch (2 pcs), strain relief including screws (2 pcs), sealing grommets for openings at the back of the housing (3 
pcs)

Should one or more components be missing after unpacking, please contact your local Mercedes-Benz distributor immedi-
ately.

PLEASE NOTE!

The carton in which the Mercedes-Benz Wallbox is delivered offers optimal protection against external influences during 
transport and storage. If possible, keep this carton and use it to pack the Mercedes-Benz Wallbox, should you need to 
send it to the manufacturer or otherwise transport it because of a malfunction or similar.