Mercedes-Benz Command Operating Instructions Manual Download

Page: 100 / 226

Map functions

General notes

Company logos displayed on the map are

trademarks of the respective companies and

used solely for the purpose of indicating the

locations of these companies. The use of such

logos on the map does not indicate approval

of, support of or advertising by these compa-

nies for the navigation system itself.

Alternatively, you can carry out this oper-

ation using the touchpad (

page 25).

Map settings

Setting the map scale

Requirement: the map is in full screen mode,

the menu is faded out (

page 59).

The lower left-hand section of the map shows

the currently set map scale and compass nee-

dle.
Right-hand-drive vehicles: the currently set

map scale and compass needle are displayed

in the lower right-hand section of the map.

To show the map in full screen mode: to

hide the menu, push the

button.

Slide the controller to the center of the map

and press to confirm.

To set the map scale: as soon as you turn

the controller, the scale bar appears on the

bottom of the display.

Turn the controller until the needle points

to the desired map scale.

Once you are finished selecting a map

scale, the new map scale will be shown.

Selecting map orientation

To switch to navigation mode: slide

the controller.

To select

Navi

: turn and press the control-

ler.

The map displays the current vehicle posi-

tion or the navigation menu appears.

If the navigation menu appears, press the

controller.

The map shows the vehicle's current posi-

tion.

To show the menu: slide

the control-

ler.

To select

Options

: turn and press the con-

troller.

Select

Map Orientation

The

dot indicates the current setting.

Turn and press the controller.

The map orientation is set.

The image is an example of the 3D map dis-

play with crosshair.

Map functions

Navigation

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands