Mercedes-Benz Command Operating Instructions Manual Download

Page: 105 / 226

Select

Avoid New Area

A menu appears.

Select

Using Map

Address Entry

If you select

Using Map

, the map with

crosshair appears.
When you have selected

Address Entry

the address entry menu appears

(

page 63). The map appears with the

crosshair after the address is entered.

To select an area: when the map with

crosshair appears, press the controller.

A red square appears on the map, symbol-

izing the area to be blocked.

To change the size of the area, turn the

controller.

The map scale is shown at the bottom of the

display. The needle points to the map scale

currently selected.

When the desired size is set, press the con-

troller.

The area is entered into the list.

Turning Area on/off and displaying/

changing the area

To switch to navigation mode: slide

the controller.

To select

Navi

: turn and press the control-

ler.

The map displays the current vehicle posi-

tion or the navigation menu appears.

If the navigation menu appears, press the

controller.

The map shows the vehicle's current posi-

tion.

To show the menu: slide

the control-

ler.

To select

Options

: turn and press the con-

troller.

Select

Route Settings

Select

Avoid Options

Select

Avoid Area

A list appears.

To switch an area to avoid on/off: select

an area by turning and pressing the con-

troller.

The area will be avoided

or not

To display/change an area: mark an area

by turning the controller.

Slide

the controller.

To select

Display/Change

: press the con-

troller.

The map with the crosshair appears.
The area currently blocked is displayed as a

red square.

To move the area to a new location: slide

the controller.

To change the size of the area: press the

controller.

Turn the controller.

To accept changes: press the controller.

A message appears stating that the area

has been set.

Map functions

103

Navi

gati

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands