Mercedes-Benz Command Operating Instructions Manual Download

Page: 107 / 226

ance can only be provided by the navigation

system in conjunction with the most up-to-

date map software.
Information about new versions of the digital

map can be obtained from an authorized

Mercedes-Benz Center. You can have the dig-

ital map updated there using a data medium,

or you can update it yourself.
For North American countries, it is possible to

update the map data for COMAND free of

charge for a period of three years. Information

on the availability of this service for your vehi-

cle can be obtained from your authorized

Mercedes-Benz Center.

Entitlement to the free update

For the first three years after your vehicle is

registered, you are entitled to all available

updates to the map software for COMAND.

They are usually installed during a regular

vehicle service. After this period, you can pur-

chase further updates from your authorized

Mercedes-Benz Center.
The free updates relate to the vehicle and not

to an individual. If there is a change of own-

ership within the three years after first regis-

tration, the new owner is entitled to the map

software updates.

Updating at an authorized Mercedes-

Benz Center

If an update for your map software is availa-

ble, you will receive it free of charge at your

authorized Mercedes-Benz Center during

your vehicle's annual service. You can

arrange a separate appointment for this at

your authorized Mercedes-Benz Center on

request.
The update can only be performed:

at an authorized Mercedes-Benz Center

for navigation data for North America

The map software is not provided on DVD.

Carrying out a manual update

After the free update of the map data has

expired or when buying map data, you can

update the data yourself.
The update process may take some time (up

to 45 minutes), depending on the size of the

digital map. The update will be completed

more quickly if the vehicle is stationary. If you

start the update with the engine switched off

and the starter battery has insufficient power,

COMAND may automatically switch off. This

protects the battery. In order to prevent this,

a suitable power supply to the vehicle must be

maintained.

Navigation functions

Calling up the navigation system

menu

To switch to navigation mode: slide

the controller.

To select

Navi

: turn and press the control-

ler.

The navigation menu appears or the map

displays the current vehicle position.

If the map appears, slide

the control-

ler.

Press the controller.

The navigation menu appears.

To return to the map: turn the controller

until

Navigation

appears and then press

the controller.

Navigation functions

105

avigat

ion

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands