Mercedes-Benz Command Operating Instructions Manual Download

Page: 117 / 226

entering a passkey. COMAND automatically

enables the procedure suited to your mobile

phone. You can recognize Secure Simple Pair-

ing by a code which is displayed in COMAND

and on the mobile phone. You can recognize

the passkey system by the fact that you have

to enter a code on the mobile phone and in

COMAND. The mobile phone is always con-

nected automatically after authorization.
If COMAND does not detect your mobile

phone, this may be due to particular security

settings on your mobile phone. You can also

start the search procedure and authorization

on the mobile phone (

page 116).

Device-specific information on authorizing

and connecting Bluetooth

-capable mobile

phones can be found on the Internet at

http://www.mercedes-benz.com/

connect.
You can authorize up to 15 mobile phones.

Only one mobile phone can be connected to

COMAND at any one time.
De-authorizing (disconnecting) a mobile

phone
The connection is terminated automatically if

you leave the receiver range of COMAND or

deactivate Bluetooth

on your mobile phone.

If you no longer want the Bluetooth

connec-

tion to be established automatically, the

mobile phone must be de-authorized (discon-

nected) (

page 118).

Searching for a mobile phone

To show the main function bar: slide

the controller.

To select

Phone

: turn and press the con-

troller.

The telephone menu is displayed.

To switch to the menu bar in the telephone

menu: slide

the controller.

To select

Connect Device

: turn and press

the controller.

The device list is displayed.

To select

Search for Phones

: turn and

press the controller.

A message is displayed that Bluetooth

must be activated on the mobile phone and

must be made visible to other devices.

To select

Start Search

: press the con-

troller.

The available mobile phones are displayed

in the device list.

The duration of the search depends on the

number of Bluetooth

telephones within

range and their characteristics.
If a new phone is found, it appears in the

device list with the

symbol. You can now

authorize (connect) the mobile phone found

(

page 116).

If the maximum number of authorized devices

in the device list is reached, you will be

requested to de-authorize a mobile phone

(

page 118).

When you call up the device list again, de-

authorized devices will be removed from the

list. To update the device list, start the search

again.
Symbols in the device list

Sym-

bol

Explanation

New mobile phone found, not yet

authorized.

Mobile phone is authorized, but is

not connected.

Mobile phone is authorized and

connected.

Connecting/disconnecting a mobile phone

115

Telephone

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands