Mercedes-Benz Command Operating Instructions Manual Download

Page: 127 / 226

Using the touchpad

You determine the first letter of the contact

you are looking for with the first character you

enter.

Draw the letter on the touchpad surface.

The first contact with the selected first

character is highlighted in the phone book.
Further information on handwriting recog-

nition on the touchpad (

page 27).

Draw additional letters on the touchpad

surface one after another.

To complete the search and return to the

phone book: press the touchpad.

To select and call the contact: glide up or

down and press.

Displaying the details of a contact

To highlight a contact in the phone book:

turn the controller.

To select

: slide

the controller.

To select

Details

: turn and press the con-

troller.

The detailed view appears.

Closing the detailed display:

To select

: slide

the controller.

Adding a new contact

Slide

the controller repeatedly in the

phone book until the selection list appears.

To select

: slide

the controller.

To select

New

: turn and press the controller.

To select a category for the number, e.g.

Home

: turn the controller and press to con-

firm.

To select a telephone category, e.g.

Mobile Phone

: turn the controller and

press to confirm.
If you have marked a number as preferred,

it appears at the top of the list and is high-

lighted.

To select

Continue

: turn and press the

controller.

The input menu with input lines is dis-

played.

Enter characters using the controller

(

page 32) or the touchpad (

page 27).

To finish and save an entry: select

The contact is created in the phone book

and in the address book.

Adding information to a contact

You can add a telephone number to an exist-

ing contact.

To highlight a contact in the phone book:

turn the controller.

To select

: slide

the controller.

To select

Add Phone No.

: turn and press

the controller.

Phone book

125

Teleph

one

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands