Mercedes-Benz Command Operating Instructions Manual Download

Page: 156 / 226

the volume of transferred data

connection status

the device name of the mobile phone

Ending the connection

USA: you cannot cancel the connection your-

self. The Internet connection is automatically

terminated if the system does not recognize

any user input within a five-minute time

period.
Canada:

To call up Internet functions (

page 153).

To switch to the menu bar: slide

the

controller.

To select

: turn and press the control-

ler.

If the mobile phone Internet connection is

canceled, COMAND tries to reconnect. You

should therefore always close the connection

on COMAND.

Google™ local search

Calling up Local Search

You do not need a Google™ account to use

Local Search.

To call up Internet functions (

page 153).

To select

Mercedes-Benz Apps

: turn and

press the controller.

To select

Google Local Search

: turn and

press the controller.

Further information on how to enter the

search position and search term

(

page 154).

You will first need to register COMAND

before you can use the Internet functions.

To do so, you have to enter your name and

postal address once in the vehicle and con-

firm the general terms and conditions.

Entering a search position and search

term

It is only possible for the driver to enter a

search term when the vehicle is stationary.
The following options are available for

Local Search:

At the current location

Searches for destinations near the current

vehicle position

In the Vicinity of the Destination

You can search for destinations in the vicin-

ity of the destination if route guidance is

active.

At another location

Searches for destinations near the location

You can also select a destination from the

general search history.

154

Google™ local search

Internet

functions

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands