Mercedes-Benz Command Operating Instructions Manual Download

Page: 157 / 226

To select the required option: turn and

press the controller.

To select

Enter search term

: turn and

press the controller.

The input menu for the search term is dis-

played.

To complete the entry and start the search,

select

: turn and press the controller.

The search results are displayed.

Google™ determines how the search

results are sorted; this is not necessarily

based on the shortest distance.

Further information on how to make use of a

search result (

page 155).

Using search results

To select a search result: turn and press the

controller.

A menu appears.

Displaying details

Select

Details

The address of the selected entry is dis-

played.

Using a search result as a destination

Select

Set as Destination

The navigation is called up. You can use the

search result as the destination for route

calculation.

At the same time the search result is

stored in the "Last destinations" memory.

You can take the destination from this

memory and save it permanently in the

contacts.

Calling up a destination

Select

Call

The telephone menu is called up and a call

is activated.

If there is no phone number available, the

menu item cannot be selected.

Calling up Google Street View™

Select

Google Street View

Google Street View™ is called up.

If no Google Street View™ information is

available, a corresponding message

appears.

Calling up Panoramio by Google™

Select

Panoramio by Google

Panoramio by Google™ is called up. You

see pictures of places worth seeing in the

vicinity of the search result.

Popular searches

You can use this function if search queries

have already been carried out.
If the vehicle is stationary, the search results

can be supplemented manually, e.g. "Hotel

Adler".

Call up Local Search (

page 154).

To select the search position, e.g.

At cur‐

rent location

: turn and press the con-

troller.

To select

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands