Mercedes-Benz Command Operating Instructions Manual Download

Page: 172 / 226

HD MW radio mode:

To select the

HD AM Frequency

option: turn

and press the controller.

Enter the frequency of the desired station

in the entry field.

Satellite radio mode:

To select the

SatRadio Channel

option:

turn and press the controller.

Enter the frequency of the desired station

in the entry field.

Station presets:

To select the

Radio Station Presets

option: turn and press the controller.

Enter the station preset of the desired sta-

tion.

Using the search function

In radio mode: slide

the controller.

The radio menu bar appears.

Select

and enter the first letters of the

required station using the controller.

Press

to confirm.

COMAND displays a list of available sta-

tions.

To select stations from the list: turn the

controller and press to confirm.

Using the preset position

In radio mode: slide

the controller.

To select

Preset

: turn and press the con-

troller.

To select

Enter Preset

: turn and press

the controller.

Enter the station preset of the desired sta-

tion.

Station list

In radio mode, press the controller.

The station list appears with the stations

currently available.

Saving/deleting a station

Storing current stations

In radio mode: slide

the controller.

The radio menu bar appears.

To select

Preset

: turn and press the con-

troller.

To select the

Save Current Station/

Channel

option: turn and press the con-

troller.

To select the position of the required preset

entry: turn and press the controller.

Select the

Edit Station Preset

option.

Select the position of the required preset:

turn the controller.
This can also be a preset position that is

already occupied, which is then overwritten

by the current station.

Slide

the controller.

An additional menu appears.

To select the

Save Current Station/

Channel

option: turn and press the con-

troller.

The currently set station is stored in the

selected preset position. A tone signals a

successful preset entry.

In the main display field, press and hold the

controller.

A list of current allocated preset positions

appears.

To select the position of the required preset

and confirm: turn the controller and press.

170

Station

Radi

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands