Mercedes-Benz Command Operating Instructions Manual Download

Page: 173 / 226

Moving highlighted stations

In radio mode: slide

the controller.

The radio menu bar appears.

To select

Preset

: turn and press the con-

troller.

Select

Edit Station Preset

To select the required preset entry: turn the

controller.

Slide

the controller.

An additional menu appears.

To select the

Move Highlighted Sta‐

tion/Channel

option: turn and press the

controller.

The list of stored stations appears again.

To move the highlighted station to the new

position: turn the controller and press to

confirm.

Deleting highlighted stations

In radio mode: slide

the controller.

The radio menu bar appears.

To select

Preset

: turn and press the con-

troller.

Select

Edit Station Preset

To select the required preset entry: turn the

controller.

Slide

the controller.

To select the

Delete Highlighted Sta‐

tion/Channel

option in the additional

menu: turn and press the controller.

To select

Yes

: turn and press the controller.

The highlighted station is deleted.

To select

: turn and press the controller.

The process is canceled.

Frequencies are already stored in

COMAND. There are 100 preset positions

available.

Activating/deactivating the station

presets display

You can use this function to change to the

station presets display.

Activating

In radio mode: slide

the controller.

To select

Preset

: turn and press the con-

troller.

To select

Station Preset View: On

: turn

and press the controller.

The station preset display appears.

To switch between the stored stations: turn

the controller.

Deactivating

In radio mode: slide

the controller.

To select

Preset

: turn and press the con-

troller.

To select

Station Preset View: Off

turn and press the controller.

A view of the last waveband you listened to

appears.

Tagging music tracks

This function allows you to transfer the music

track currently playing to an Apple

device.

You can then purchase it in the iTunes

store.

In radio mode: slide

the controller.

The radio menu bar appears.

To select

Options

: turn and press the con-

troller.

Select

Tag This Track

A message appears in COMAND about stor-

ing the track information.

Displaying the artist and track

In radio mode: slide

the controller.

The radio menu bar appears.

To select

Options

: turn and press the con-

troller.

You can determine whether or not the

artist, track or station name are shown in

the main display area with

before

Show Station Information

Displaying the artist and track

171

Radio

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands