Mercedes-Benz Command Operating Instructions Manual Download

Page: 176 / 226

Selecting a category

Satellite radio channels are sorted into vari-

ous categories. You can choose between var-

ious categories such as News/Discussions,

Sports and Country (if available). The cate-

gory list is sorted alphabetically. The content

of the categories is sorted by channel num-

bers.

To call up the category list: select

Cat‐

egory

in the menu bar by turning and

pressing the controller.

The category list appears.

To select a category: turn the controller

and press to confirm.

The category selected is shown in the dis-

play. You hear the station last selected for

this category.
The

dot indicates the current setting.

At the beginning of the category list, the

All Channels

category appears. This cat-

egory enables you to browse all available

channels.

Selecting a channel

Channel search

When the display/section window is selec-

ted, slide

the controller.

COMAND searches in both directions

(ascending and descending) and stops at

the next channel found in the selected cat-

egory.

Entering channel numbers directly

To select

Options

in the radio menu bar:

turn and press the controller.

The satellite radio menu appears.

To select

Direct Entry

: turn and press

the controller.

An input menu appears.

To select a channel number: turn and press

the controller.

COMAND sets the selected channel.

You can only select currently permitted

digits.

Selecting a channel via the satellite

radio station list

You can select the channel using the station

list displaying the artists and tracks that are

currently playing.

To select

Options

in the radio menu bar:

turn and press the controller.

To select

Current Station List with

Artist & Title

: turn and press the con-

troller.

The channel list appears.

Select the desired channel

Keyword search

To select the keyword search

in the

menu bar: slide

and turn the controller.

To enter the required search term: turn and

press the controller.

Direct and indirect results are shown.

Select the required result.

The relevant channel is played.

174

Satellite radio

Radio

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands