Mercedes-Benz Command Operating Instructions Manual Download

Page: 185 / 226

Make sure that you know about the applicable

with these.

Notes on CDs/DVDs

COMAND is designed to play discs that

comply with the EN 60908 standard. There-

fore, you can only use discs with a maxi-

mum thickness of 1.3 mm.
If you insert thicker discs, e.g. those that

contain data on both sides (DVD on one

side and audio data on the other), they can-

not be ejected and can damage the device.
Only use round discs with a diameter of

12 cm. Do not use discs with a diameter of

8 cm, even with an adapter.

Discs with copy protection are not compati-

ble with the audio CD standard and therefore

may not be able to be played by COMAND.
Playback problems may occur when playing

copied discs.
There may be playback problems if you play

CDs that you have copied yourself with a stor-

age capacity of more than 700 MB.

COMAND is able to play back audio CDs in

multichannel audio format.

Inserting and removing a disc from

the single CD/DVD drive

Before inserting or removing a CD/DVD,

ensure that the cup holder is empty.
Before removing a disc, be aware that the

CD/DVD can become hot.
Inserting

Insert a disc into the disc slot with the prin-

ted side facing upwards.

The drive closes and the disc is played.
If the CD/DVD is operated in Media mode,

the corresponding basic menu will be

shown. If the CD/DVD is started using

another application (e.g. navigation), the

display will not change.

The drive may not be able to play discs

with copy protection.

Removing

In the CD basic menu slide the controller

To select

: turn and press the control-

ler.

The drive ejects the disc. If you do not take

the disc out of the slot, it is drawn in again

automatically after a short while.

To select

Media

in media mode: slide

and press the controller.

To select

Eject

: turn and press the con-

troller.

Menu overview

Main function bar

;

Ejects the CD/DVD

Track display on the disc

Track number and number of tracks in the

track list

Artist and album

Numerical time display

Graphic time display

Cover view (if available)

Audio/video mode

183

Media

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands