Mercedes-Benz Command Operating Instructions Manual Download

Page: 191 / 226

Selecting by cover

To select

Select By Cover

in the category

list: turn and press the controller.

A menu with cover views appears.
COMAND searches all media sources.

To move the desired folder to the front: turn

the controller.

The track list appears.

To select the desired track: turn and press

the controller.

Searching by genre

To select

Genres

in the category list: turn

and press the controller.

COMAND searches all media sources. A

selection list with

Genres

and media sour-

ces appears.

Select the desired

Genres

A selection list with music tracks from the

selected genre appears.

Select a music track.

The track is played. The basic menu for the

active media source is shown.

To exit the selection list: press the

button.

Keyword search

To select

Keyword Search

in the category

list: turn and press the controller.
The input field appears.

To select required characters: turn and

press the controller for each letter

(

page 32).

Entering just part of the name of a track or

artist is enough. The search result then dis-

plays the entire text.

Select

The search results are displayed.
The numbers behind the results, as shown

in the example

Tracks

(5/0), mean: 5

Media search

189

Media

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands