Mercedes-Benz Command Operating Instructions Manual Download

Page: 193 / 226

USB storage device

MP3

Data can only be copied from an MP3

player if this can be configured as a mass

storage device.
Video files from DVD-V cannot be copied.
While copying, several functions will not be

available. If this is the case, you will see a

message to this effect.

1. Selecting a data medium

To display the main function bar: slide

the controller.

To select

Media

: turn and press the con-

troller.

The menu appears with the available media

sources.

To select the media source: turn the con-

troller and press to confirm.

To switch to the menu bar: slide

the

controller.

To select

Options

: turn and press the con-

troller.

Select

Save Files to Media Register

The media list appears. A data medium

from which files can be copied is selected

automatically.

The

Save Files to Media Register

function can be reached from any media

application.

Select the displayed data medium.

The data medium is loaded.

If the data medium contains files that can

be copied, a selection menu appears.

2. Selecting files

To select

All Media Files

: turn and press

the controller.

This command copies all files from the

selected data medium. The symbol next to

All Media Files

is filled in. All subse-

quent entries have a checkmark

beside

them.

Select a folder.

A checkmark

next to the folder entry

highlights the selection.

To select

Continue

: turn and press the

controller.

The copying menu appears.

3. Starting the copying process

In the example, files are copied from a USB

device to the Media Register.

To select

Start

: press the controller.

The selection of a target folder is optional.

If there is no target folder given, the selec-

Media Register

191

Media

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands