Mercedes-Benz Command Operating Instructions Manual Download

Page: 201 / 226

Starting playback if the Bluetooth

audio device has been stopped

During the search for mobile phones

(

page 115), the connection with the Blue-

tooth

audio device is terminated. In the

Bluetooth

audio basic display (

page 198)

you will see the

No Bluetooth Audio

Device Connected

message and the

Con‐

nect Last Used Player

menu item cannot

be selected.
When the search is finished, the Bluetooth

audio device can be reconnected.

To select Start playback:

: slide

and press the controller.

Playback resumes from the beginning.

To select

Connect Last Used Player

press the controller.

Depending on the Bluetooth

audio device

used, playback starts immediately or you

must start playback manually.
In this case, you will see the

Bluetooth

Audio Device Paused

message.

If there is an Internet connection and the

mobile phone that is connected only sup-

ports two Bluetooth

profiles at the same

time, the Internet connection is interrup-

ted.

The connection to the Bluetooth

audio

device can also be interrupted if:

the connected mobile phone only sup-

ports 2 Bluetooth

profiles at the same

time.

you connect to the Internet using

COMAND (

page 153).

Selecting a track

The function is not supported by all Blue-

tooth

audio devices.

Some mobile phones impair function with

regard to the following criteria:

the number of tracks that can be selected

the time period until the next or previous

track is played

Switch the multifunction steering wheel to

the media menu (see the vehicle Operator's

Manual).

To skip forwards or backwards to a

track: press the

button on

the multifunction steering wheel.

Rapid scroll: press and hold the

button on the multifunction steer-

ing wheel until the desired track is reached.

If you press and hold the

buttons, the rapid scrolling speed increa-

ses after a short time.

In rapid scroll, track names are not

shown, but instead only Track1, Track2 etc.

The playback times for the tracks played

are not displayed. This is available as an

optional function starting with AVRCP Ver-

sion 1.3. There is also no music search

option available with Bluetooth

Audio.

Selecting playback options

If the Bluetooth

audio device supports the

corresponding function, the following options

are available:

Normal Track Sequence

: the tracks are

played in the normal order (e.g. track 1, 2, 3

etc.).
Audio data playback is determined by the

order in which the tracks are written to the

data medium. Alphabetical order is the

most common. Once all the tracks in a

folder have been played, the tracks in the

next folder are played.

Random Track List

: the current track list

is played in random order (e.g. 3, 8, 5 etc.).

Random Medium

: all tracks on the data

medium are played in random order (e.g.

track 3, 8, 5 etc.).

Bluetooth

audio mode

199

Media

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands