Mercedes-Benz Command Operating Instructions Manual Download

Page: 25 / 226

Buttons and controller

Overview

Back button

;

Controller

Favorites button

Switches COMAND on or off (

page 30) and adjusts the volume (

page 30)

Touchpad

Back button

You can use the

button to exit a menu or

to call up the basic display of the current

operating mode.

To exit the menu: briefly press the

button.

COMAND changes to the next higher menu

level in the current operating mode.

To call up the basic display: press the

button for longer than two seconds.

COMAND changes to the basic display of

the current operating mode.

Controller

The controller in the center console lets you:

select menu items on the display

enter characters

select a destination on the map

save entries

The controller can be:

turned

slid left or right

slid forwards or back

slid diagonally

pressed briefly or pressed and held

Favorites button

With the favorites button, you can select, add

or edit favorites.

Press the favorites button on the controller.

The favorites are displayed.

To select a favorite: turn and press the

controller.

Overview

Overvi

ope

rati

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands