Mercedes-Benz Command Operating Instructions Manual Download

Page: 28 / 226

Do not press your finger too hard on the

touchpad. This could cause malfunctions.

Use one finger to press the touch-sensitive

surface until you reach the pressure point.

A menu, an option or an application is star-

ted.

Calling up quick access for audio and

telephone

Use two fingers to touch the lower part of

the touch-sensitive surface.

Swipe your fingers up.

Quick access is displayed.

Further information on quick access for audio

and telephone (

page 29).

Hiding the quick access for audio and

telephone

Use two fingers to touch the touch-sensi-

tive surface.

Swipe your fingers down.

Quick access is hidden.

Operating the control for vehicle and

sound settings

Touch the touch-sensitive surface with two

fingers, spaced slightly apart.

Turn both fingers clockwise.

The control setting is increased.

Turn both fingers counter-clockwise.

The control setting is decreased.

Moving the map

Use one finger to press the touch-sensitive

surface until you reach the pressure point.

The crosshair is shown.

Touchpad

ope

rati

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands