Mercedes-Benz Command Operating Instructions Manual Download

Page: 42 / 226

Setting

Function

Automatic

The summer and

standard time are

automatically

changed over.

The clock is

advanced one hour

ahead of standard

time.

Off

The standard time

for the chosen time

zone is selected.

Manual time setting

Using the manual time settings, you can set

the time forwards or backwards by up to sev-

eral hours.

Press

Vehicle

in the main function bar.

The vehicle menu is displayed.

To select

Time

: slide

, turn and press

the controller to confirm.

A menu appears.

To select

Set Time Manually

: turn and

press the controller.

A menu with an analog clock appears.

To set the hour: turn the controller.

To highlight minutes: slide

the con-

troller.

To set minutes: turn and press the control-

ler.

The time is accepted.

The

Automatic Time Settings

function

is deactivated

Automatic

is set for the summer time

changeover, a prompt will appear asking

whether the automatic changeover should

be maintained between summer and winter

time.

Automatic Time Settings

is reacti-

vated, the previous settings for time zone

and summer time changeover are restored.

Setting the time and date format

Use this function to set the time and date for-

mat for all displays in the vehicle.

Press

Vehicle

in the main function bar.

The vehicle menu is displayed.

To select

Time

: slide

, turn and press

the controller to confirm.

A menu appears.

To select

Format

: turn and press the con-

troller.

To select the desired date format: turn and

press the controller.

The

dot indicates the current setting.

To select the desired time format: turn and

press the controller.

The

dot indicates the current setting.

Abbreviation

Meaning

YYYY/MM/DD

Year/Month/Day
date format, year (all

four digits)

YY/MM/DD

Year/Month/Day
date format, year

(two digits)

MM/DD/YYYY

Month/Day/Year
date format, year (all

four digits)

DD/MM/YYYY

Day/Month/Year
date format, year (all

four digits)

Time settings

System

settings

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands