Mercedes-Benz Command Operating Instructions Manual Download

Page: 49 / 226

If PIN protection is activated, a PIN prompt

appears when you select

Export Data

To enter the PIN: turn the controller and

press

to confirm.

PIN protection is deactivated.

To select

Memory Card

Media Inter‐

face 1

Media Interface 2

: turn and

press the controller.

This function exports all the data to the

selected disc.
A window appears with the message that

the data has been exported.

You can export address data, bookmarks,

system settings that you have made and radio

station lists, for example.
Personal music files in the MEDIA REGISTER

cannot be saved and imported again using

this function.
Mercedes-Benz is not liable for any loss of

data.

Reset function

You can reset COMAND to the factory set-

tings. Amongst other things, this will delete all

personal COMAND data. These include, for

example:

Station presets

Entries in the destination memory

Entries in the list of previous destinations in

the navigation system

Entries in the address book

Authorized telephone

In addition, an activated PIN protection,

which you have used to protect your data

against unwanted export, will be deactivated.

Resetting is recommended before selling or

transferring ownership of your vehicle, for

example.
Data on the internal hard drive, e.g. music

files in the MEDIA REGISTER, will be deleted.
Mercedes-Benz is not liable for any loss of

data.

Press

Vehicle

in the main function bar.

The vehicle menu is displayed.

To select

System Settings

: slide

turn and press the controller to confirm.

A menu appears.

To select

Reset

: turn and press the con-

troller.

A prompt appears asking whether you wish

to reset.

Select

Yes

If you select

the process is canceled.

If you select

Yes

a prompt will appear again

asking whether you really wish to reset.

Select

Yes

If you select

Yes

a message will be shown.

COMAND is reset to the factory settings

and restarted.
If you select

the process is canceled.

Reset function

System

settings

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands