Mercedes-Benz Command Operating Instructions Manual Download

Page: 70 / 226

To select

Search Options

: slide

, turn

and press the controller.

Select

Fuzzy Search

POI Search

Switch the setting on

or off

The error-tolerant search is useful if parts

of the address are incomplete or the spell-

ing is unclear.
The POI search takes into account points of

interest in the search.

Selecting a state/province

To switch to navigation mode: slide

the controller.

To select

Navi

: turn and press the control-

ler.

The map displays the current vehicle posi-

tion or the navigation menu appears.

If the navigation menu appears, press the

controller.

The map shows the vehicle's current posi-

tion.

To show the menu: slide

the control-

ler.

To select

Destination

: turn and press the

controller.

Select

Keyword Search

To select

State/Province

: slide

, turn

and press the controller to confirm.

States/provinces are sorted alphabeti-

cally.

To select a state/province : turn and press

the controller.

Searching via COMAND

Requirement (USA): mbrace must be activa-

ted for Internet access (

page 148).

Requirement (Canada): a mobile phone must

be connected via Bluetooth

(

page 114) or

USB (

page 200) with COMAND.

To switch to navigation mode: slide

the controller.

To select

Navi

: turn and press the control-

ler.

The map displays the current vehicle posi-

tion or the navigation menu appears.

If the navigation menu appears, press the

controller.

The map shows the vehicle's current posi-

tion.

To show the menu: slide

the control-

ler.

To select

Destination

: turn and press the

controller.

Select

Keyword Search

To select

Online Search

: slide

, turn

and press the controller.

The search switches to the online func-

tions.

Selecting a destination from the list of

last destinations

COMAND automatically stores the last 50

destinations.

Destination entry

Navigation

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands