Mercedes-Benz Command Operating Instructions Manual Download

Page: 88 / 226

Calling up the selection mode

When highway information is displayed,

slide

the controller.

The marker is on the highway information.

The associated position is highlighted on

the map.

To select the desired rest stop/freeway

exit: turn and press the controller.

The available POIs are displayed.

Starting route guidance to a POI

To select a POI: turn the controller and

press to confirm.

The POI details are displayed.
You can perform the following functions:

store in the address book (

page 96)

view on the map (

page 101)

called if a phone is connected and a

phone number is available (

page 120).

select for route guidance and a route to it

calculated (

page 65).

Using the traffic jam function

Highway information enables the use of the

traffic jam function. The remaining route on

the highway in this case is blocked in the

direction of travel from the selected exit.

To select

Detour

: turn and press the con-

troller.

The traffic jam function appears

(

page 89).

Destination reached

Once the destination is reached, you will see

the checkered flag. Route guidance is fin-

ished.

Navigation announcements

Repeating navigation announcements

If you missed the current navigation

announcement, you can call it up again.

Route guidance

avigat

ion

Summary of Contents for Command



































































































































































































































Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands

Mercedes-Benz Command, Operating Instructions Manual

Search results

Summary of Contents for Command

Reviews:

Related manuals for Command

Brands by name

Popular brands