background image

5

3.

To locate the Pass-Key remove cover (5) 

by sliding it away from the Mercedes-Benz 
Cradle adaptor with Bluetooth

®

. Located 

behind this cover (5) there will be a sticker 
containing the Pass-Key (6).

4.

When prompted, enter the Pass-Key 

into the mobile telephone. Depending on the 
type of mobile telephone being used, it may 
be necessary to confirm a connection 
request (see the mobile telephone manual).

5.

Once the Pass-Key has been entered 

and accepted the LED’s (4) will be lit conti-
nuously. This confirms that the mobile tele-
phone is paired and connected and the 
mobile telephone information has been 
stored in the Mercedes-Benz Cradle adaptor 
with Bluetooth

®

.

6.

The mobile telephone is now ready for 

use with the Mercedes-Benz Hands-Free 
Communication System.

5

6

M+P-03F-6379

6

Establishing a Bluetooth

®

 

Connection

Notes

A maximum of 4 mobile telephones can be 
paired with the Mercedes-Benz Cradle adap-
tor with Bluetooth

®

. However, only one mo-

bile telephone is connected to the 
Mercedes-Benz Cradle adaptor with Blue-
tooth

®

 at a time. If a fifth mobile telephone 

is paired with the Mercedes-Benz Cradle ad-
aptor with Bluetooth

®

, then the information 

stored from the first mobile telephone which 
was paired with the Mercedes-Benz Cradle 
adaptor with Bluetooth

®

 will be replaced.

When the starter switch is in position 1, 2 or 
3 (see the vehicle Operator's Manual), the 
Mercedes-Benz Cradle adaptor with Blue-
tooth

®

 will search for the last connected 

mobile telephone and reconnect.

The Mercedes-Benz Cradle adaptor with
Bluetooth® will automatically begin a
continuous search for a previous paired
mobile phone after startup.

If the last connected mobile telephone is not 
found the Mercedes-Benz Cradle adaptor 
with Bluetooth

®

 will search for one of the 

previously paired phones and connect to it.

If the connection between the 
Mercedes-Benz Cradle adaptor with Blue-
tooth

®

 and mobile telephone is not establis-

hed automatically, it is possible to establish 
a connection manually (see 

8

).

7

Note

When using Bluetooth

®

 the mobile telepho-

ne uses more power. Since the mobile tele-
phone is not being charged the battery 
should have a sufficient charge.

SMS messages can not be accessed via the 
COMAND or radio while the Bluetooth

® 

connection is established.

Not every ring-tone of the mobile telephone 
is supported by the COMAND or radio.

3-way-calling and call waiting are not sup-
ported from the Mercedes-Benz Cradle ad-
aptor with Bluetooth

®

. An audible peep will 

notify a waiting call.

The roaming indication is not supported by 
the COMAND or radio.

For a list of supported features please visit 
www.wireless4mb.com.

The Tele Aid System (emergency call sys-
tem) will continue to function as designed as 
long as there is a valid service contract.

8

Connecting the mobile telephone and 
Mercedes-Benz Cradle adaptor with Blue-
tooth

®

 manually

Valid for all Mercedes-Benz vehicles with the 
exception of the model year 2007 S-Class:

Press 

 button on the COMAND or 

radio.

Model year 2007 S-Class vehicles:

Using the COMAND Controller, select 
"

Telephone

 "

Telephone

 "

Tele-

phone on

".

Note

Before manual connection, the mobile tele-
phone must previously be paired with the 
Mercedes-Benz Cradle adaptor with Blue-
tooth

®

 (see pairing procedure 

4

).

When the mobile telephone is within the ran-
ge (approx. 30 ft) of the Mercedes-Benz 
Cradle adaptor with Bluetooth

®

, the connec-

tion between the mobile telephone and the 
Mercedes-Benz Cradle adaptor with Blue-
tooth

®

 remains active, and phone calls 

made with the mobile telephone use the ve-
hicle’s hands-free system. For this reason, 
the connection between the mobile telepho-
ne and the Mercedes-Benz Cradle adaptor 
with Bluetooth

®

 should be disconnected 

manually if the mobile telephone is taken out 
of the vehicle (see 

9

).

9

Disconnecting the Bluetooth

® 

connec-

tion automatically

The connection between the Mercedes-Benz 
Cradle adaptor with Bluetooth

®

 and the 

mobile telephone is automatically discon-
nected when the mobile telephone travels 
outside of the range (approx. 30 ft) of the 
Mercedes-Benz Cradle adaptor with Blue-
tooth

®

.

Disconnecting the Bluetooth

®

-connec-

tion manually

The connection between the mobile telepho-
ne and the Mercedes-Benz Cradle adaptor 
with Bluetooth

®

 can be disconnected at any 

time by using the mobile telephone (see the 
mobile telephone manual).

To disconnect the paired mobile telephone 
from Mercedes-Benz Cradle adaptor with 
Bluetooth

®

 using the COMAND or radio.

Valid for all Mercedes-Benz vehicles with the 
exception of the model year 2007 S-Class:

Press  and  hold 

 button on the 

COMAND or radio for approx. 
3 seconds.

Model year 2007 S-Class vehicles:

Using the COMAND Controller, select 
"

Telephone

 "

Telephone

 "

Tele-

phone off

".

Note

If a phone call is in progress, the connection 
can only be disconnected directly on the 
mobile telephone (see the mobile telephone 
manual).

10

Detaching the Mercedes-Benz Cradle 
adaptor with Bluetooth

®

Press and hold the release button (7). Slide 
the Mercedes-Benz Cradle adaptor with 
Bluetooth

®

 (1) in direction of arrow (8) and 

remove it from the pre-installed contact 
plate (2).

Note

This device complies with part 15 of the FCC 
Rules. Operation is subject to the following 
two conditions:

This device may not cause harmful inter-
ference.

This device must accept any interfe-
rence received, including interference 
that may cause undesired operation.

1

8

7

2

M+P-03F-6314

Reviews: