Connecting a mobile phone
(COMAND)
Requirements
For telephony via the Bluetooth
®
interface, you
require a Bluetooth
®
-capable mobile phone.
The mobile phone must support Hands-Free
Profile 1.0 or above.
Multimedia system:
X
Select
Vehicle
Vehicle
Q
System Set‐
System Set‐
tings
tings
Q
Activate Bluetooth
Activate Bluetooth
.
X
Activate Bluetooth
®
O
.
Mobile phone:
X
Activate Bluetooth
®
and, if necessary, Blue-
tooth
®
visibility for other devices (see the
manufacturer's operating instructions).
The Bluetooth
®
device names for all of one
manufacturer's products might be identical. To
make it possible to clearly identify your mobile
phone, change the device name (see the man-
ufacturer's operating instructions).
If the mobile phone supports the PBAP (Phone
Book Access Profile) and MAP (Message
Access Profile) Bluetooth
®
profiles, the follow-
ing information will be transmitted after you
connect:
R
Phone book
R
Call lists
R
Text messages and e-mail
i
Further information on suitable mobile
phones can be found at: http://
www.mercedes-benz.com/connect
i
In the USA, you can get in touch with the
Mercedes-Benz Customer Assistance Center
on 1-800-FOR-MERCedes
(1-800-367-6372).
In Canada, you can get in touch with the
Customer Relations Center on
1-800-387-0100.
Searching for and authorizing (con-
necting) a mobile phone
Before using your mobile phone with the multi-
media system for the first time, you will need
to search for the phone and then authorize
(connect) it. Depending on the mobile phone,
authorization either takes place by means of
Secure Simple Pairing or by entering a pass-
key. The multimedia system automatically
makes the procedure that is relevant for your
mobile phone available. The mobile phone is
always connected automatically after authori-
zation. Further information on using a mobile
phone with the multimedia system (see the
Digital Operator's Manual).
If the multimedia system does not detect your
mobile phone, this may be due to particular
security settings on your mobile phone (see
the manufacturer's operating instructions).
Only one mobile phone can be connected to
the multimedia system at any one time.
Searching for a mobile phone
Multimedia system:
X
Select
Tel/
Tel/
®Q
Conn.
Conn.
Device
Device
Q
Search for Phones
Search for Phones
Q
Start
Start
Search
Search
.
The available mobile phones are displayed.
Symbols in the device list
Sym-
bol
Explanation
Ï
New mobile phone found, not yet
authorized.
Ñ
Mobile phone is authorized, but is
not connected.
Connecting a mobile phone
Authorization using Secure Simple Pairing:
X
Select mobile phone.
A code is displayed in the multimedia sys-
tem and on the mobile phone.
X
If codes match: select
Yes
Yes
on the multime-
dia system.
X
Confirm code on the mobile phone. Depend-
ing on the mobile phone used, confirm the
connection to the multimedia system and
for the PBAP and MAP Bluetooth
®
profiles.
The prompt to confirm may take up to two
minutes to be displayed (see the manufac-
turer's operating instructions).
X
If the codes are different: select
No
No
on the
multimedia system.
The process is canceled.
Repeat authorization.
246
Operating system
Multimedia
system