of rear
wing. windshietd and rear-view mirror
Insert
the rear
wing (port 8) into the
corresponding
hole position and tighten it
aoding to
the direction indicated by the
anow
Assembly completion drawing
16
Install the windshield (part 2) and rear-vtew
mtrror (part 4) at
the assigned location or the car front
end, find each bucklo
position before installation, pross it
forcefully until each
buckle position is tight. and tighten
tho rear-view mirror with
the screw (part 16) and screw cap
(part 17).
IV. Installation
and replacement of remote control
batteries
2.4G remote control
Battery Cover
2x1.5V AAA
batteries
The fixing glue meson
on the screw can
prevont the screw
Batte
from dropping out Compartment
Unscrew the battery cover screws of the remote control (part 22), open the battery cover, find
the positive and
negative poles, put AAA batteries into the battery compartment, close the battery cover and fix it with
screws.
V. Function and Operation
1. Main functions:
1) Remote control and foot-tread change-over switch
2) Postposition dual drive: Two 6V/10000r (550) motor gearboxes can provide the strong "front or reaff
power.
3) Forward/backward function: The right side of the dashboard is provided with the three fonvard gears
for speed regulation,
neutral gear and reverse gear (each gear has LED lamp display function.)
