11
Switching to hands-free mode
For the hands-free system to operate pro-
perly, the mobile phone has to be inserted
and switched on, and hands-free mode has
to be activated.
A small vehicle (arrow) appears in the dis-
play. If the small vehicle does not appear:
remove and re-insert the mobile phone (3).
Notes
The Bluetooth
®
connection between the
mobile phone and the cradle is interrupted
automatically when the mobile phone is re-
moved from the cradle.
After the Bluetooth
®
connection between
the mobile phone and the cradle is interrup-
ted automatically, if there is an active call it
will continue on the mobile phone.
An active call is automatically connected
with the hands-free system when you insert
the mobile phone in the cradle in the vehicle.
3
M+P-03F-7140
12
General notes on operation
On the mobile phone, the
"Flight request"
function must not be activated, otherwise
the connection between the cradle and the
inserted mobile phone will not be establis-
hed. (Please refer to the mobile phone ope-
rating instructions.)
If, during an active call, the mobile phone is
placed in the cradle, the phone number will
not be displayed on COMAND or the Audio
system.
For information on operating the mobile pho-
ne via the multi-function steering wheel, see
the COMAND and/or Audio Operating
Instructions and/or the vehicle Owner's
Manual.
Press the
æ
or
ç
buttons to adjust the
volume during a telephone call.
The setting for transmitting and displaying
the telephone number switches to "
Set by
network
" when the mobile phone is placed in
the cradle. (Please refer to the mobile phone
operating instructions.) The settings for the
transmission of the telephone number in
hands-free mode must be made by the net-
work provider or the service provider. To
make these settings, please contact the net-
work provider or the service provider.
In newer vehicles, the 30 most recent text
messages (SMS) can be displayed in the
COMAND or Audio system.
You should not store too many text mes-
sages (SMS) in the Inbox of the mobile pho-
ne. (Please refer to the mobile phone
operating instructions.)
It is recommendable to switch off the mobile
phone at least once a months. (Please refer
to the mobile phone operating instructions.)
13
Speed-dial keys
Speed-dial key for mailbox
The
A
key can be programmed as a
speed-dial key for your mailbox.
To program the speed-dial key:
1.
Press button
A
on the mobile phone
for approximately 3 seconds. In the mobile
phone display the message "
Save voice mail-
box number first
" appears, then a request for
you to enter the telephone number of the
mailbox.
2.
Enter the voice mailbox number on the
mobile phone and confirm.
Calling up a speed-dial key
Press the
A
button on COMAND and/or
the Audio system for approx. 3 seconds.
Other speed-dial keys
On some vehicle model series it is possible
to access the SIM card memory keys 2 to 9
via the buttons
2
to
9
on COMAND
and/or the Audio system.
Note
You must save numbers on memory keys 2
to 9 on the SIM card according to your pre-
ference. On Nokia mobile phone 3109c and
3110c, the SIM card memory keys are not
displayed. Press buttons
2
to
9
on
the operating system in order to show the
corresponding number. If, for example, a
telephone number is saved on speed-dial
key
3
, then this number must be selec-
ted on the operating system keypad and
may, if necessary, be renamed on the mobile
phone. (Please refer to the mobile phone
operating instructions.)
Calling up a speed-dial key
Press and hold the corresponding button on
COMAND or the Audio system for approx.
3 seconds.
14
Removing the mobile phone
1.
Slide the locking tab (4) upwards and
remove the mobile phone (3) from the
cradle (1).
Detaching the cradle
1.
Remove the mobile phone from the
cradle (see above).
2.
Press the release button (5), slide the
cradle (1) downwards and remove.
abc
abc
jkl
jkl
tuv
tuv
def
def
mno
mno
wxyz
wxy
z
ghi
ghi
qqrs
qqr
s
1
3
4
M+P-03F-7078
1
5
M+P-03F-6836
