Display messages
268
Display messages
Possible cause/consequence
Possible solution
>
Compressor cooling
down
You have selected a higher vehicle level.
The compressor first needs to cool down
because of frequent level changes.
X
Drive as appropriate for the current vehicle
level.
X
Make sure that there is sufficient ground clear-
ance.
X
Allow the compressor to cool down.
Once the compressor has cooled down, the
message disappears. The vehicle then contin-
ues rising to the selected level.
>
Malfunction
The rear axle level control* or AIR-
MATIC* has malfunctioned.
X
Vehicles with rear axle level control*: do not
exceed a maximum speed of 80 km/h.
X
Vehicles with AIRMATIC*: drive as appropriate
for the current vehicle level, but no faster than
80 km/h.
X
Make sure that there is sufficient ground clear-
ance.
X
Have the vehicle checked at a qualified spe-
cialist workshop.
Practical advice
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 268
Dateiname: 6515_1825_02_buchblock.pdf;
preflight