P 3
Please retain product label and instructions for future reference
Pre Assembly
Before assembling remove the transportation
blocks from the bottom of each panel.
6
6
Step 1
Place the floor (
No. 6
) onto a firm and level
base upside down, ensuring the base
has suitable drainage & is free from
areas where standing water can collect.
Secure the floors together using 6x50mm
screws, fixing in an alternating pattern
as shown in the illustration.
Once fitted, turn the floor assembly the
right way up.
6x50mm Screws
Pre drill
hole
50mm
screw
9
14
16
Cut down to fit
a
b
c
Step 2:
Door panel assembly
Locate the doors (
No. 7
) into the door panel
and fix in place using 3x T-Hinges (
No. 14
),
securing with 7x30mm screws.
Attach the pad bolt (
No. 16
) to the centre door
support and the catch to the opposite door with
10x30mm screws.
Measure between the top and bottom of the
door to the pad bolt and cut 2x (
No. 9
) strips
to fit, secure in place with 2x20mm screws per
strip.
52x30mm Screws
4x20mm Screws
a
b
c
Pre drill
hole
30mm
screw
20mm
screw
1
Pre drill
hole
30mm
screw
Step 3:
Window panel assembly
Cut 7x (
No. 10)
strips to 515mm and secure 4x
strips to the inside of the window gap
using 2x20mm screws per strip.
*Ensure the strips are flush with the framing.
Place the plastic cill (
No. 17)
on top of the board
and rest the styrene (
No. 18)
in the window gap.
Measure the window gap and cut 1x (
No. 10)
strip to fit, securing in place with 3x20mm
screws. Attach the remaining 3 (
No. 10)
strips from
part
a
using 2x20mm screws per strip.
17x20mm Screws
Cut down to fit
Pre drill
hole
30mm
screw
a
b
c
*For added weather protection fit your
windows using silicone sealant around
the outside edges.
a
b
c
16
10
10
10
10
18
18
10
10
10
10
2
17
SILICONE
SEALANT
