P 4
Please retain product label and instructions for future reference
Place the next two Back panel
(No.6)
onto the floor. Fix the panel to the end
of the already standing Small Back Panel
using 3x50mm Screws.
Do not secure the building to the
floor until the roof has been fitted.
Position the panels so there is equal
spacing between the floor and
cladding on all sides.
6x50mm Screws
Pre drill
hole
50mm
screw
Step 4
Parts needed - No.6 QTY 2
a
a
a
6
a
a
a
6
Step 5
Parts needed - No.2 QTY 1
- No.5 QTY 1
- No.8 QTY 1
a
a
a
a
a
a
a
a
a
5
8
2
Place the 2079mm Front Panel
(No.8)
and the Side panel
(No.5)
onto the
floor, Fix the panels at the corner using
3x50mm Screws.
Place the Window Panel
(No.2)
along
side the 2079mm Front Panell
(No.8)
and fix at the ends using 3x50mm
screws.
Do not secure the building to the
floor until the roof has been fitted.
Position the panels so there is equal
spacing between the floor and
cladding on all sides.
9x50mm Screws
front
a
Pre drill
hole
50mm
screw
Place the Door panel
(No.3)
onto the
floor, Fix the panel at the corners using
3x50mm Screws
Do not secure the building to the
floor until the roof has been fitted.
Position the panels so there is equal
spacing between the floor and
cladding on all sides.
6x50mm Screws
Pre drill
hole
50mm
screw
Step 6
Parts needed - No.3 QTY 1
3
a
a
a
a
a
a
front
a
Place the Left Gable
(No.10)
and the
Right Gable
(No.11)
onto the side
panels, ensuring the boards interlock.
Secure in place using 4x50mm screws
per gable top, screwing in an alternating
pattern.
Using 2x50mm screws, fix gables to the
front panels at the corners.
12x50mm Screws
Pre drill
hole
50mm
screw
Step 7
Parts needed - No.10 QTY 1
- No.11 QTY 1
11
10
