P 5
Please retain product label and instructions for future reference
Step 11
Fix the support block
between the apex of the roof
flush with the edge of the
roof sheets using 30mm
screws.
Fix the fascia block in the
middle of the the large roof
sheet flush with the edge
using 30mm screws.
25
28
30mm
screw
x4
4 x 30mm Screws
Step 12
Cut the felt into 3 sheets and
lay onto roof as shown in
diagram ensuring there is a
50mm overhang around the
sides.
Fix using felt tacks at 100mm
intervals
Felt
tacks
x100
29
100 x Felt Tacks
Fix fascias and diamond finials
using 40mm screws to the roof eave
framing, fascia blocks and support
block. Pre drill holes to avoid
splitting. Ensure to trap the felt
between the fascia and building.
40mm
screw
x14
Step 13
21
24
19
14 x 40mm Screws
Step 14
Once the roof section
is secured fix the panels
to the floor using 8 x
50mm screws, ensure
that the building is
square before attaching
to the floor.
50mm
screw
x20
20 x 50mm Screws
