P 5
Please retain product label and instructions for future reference
104x Tacks
Felt
tacks
21
HANDLE
WITH CARE
1
2
3
4
Step 7
Cut the felt into 2490mm long
sheets and lay onto roof as
shown in diagram ensuring
there is overhang around the
sides then nail the felt tacks
every 100mm.
Fit the Cover Trims to the front
and back of the building as
shown in the illustration using
30mm screws. Trim the length
of the cover trims to the
required size before fitting if
necessary.
Pre drill to avoid splitting.
12x30mm Screws
10
Step 8
10
10
10
30mm
screw
Pre drill
hole
Step 9
16x40mm Screws
Attach the faiscas to the roof
leaving a slight overhang at the
top.
Fit the fascias to the roof over
the felt and secure in place with
40mm screws as shown.
Pre drill to avoid splitting.
40mm
screw
Pre drill
hole
17
17
8
8
8
8