P 16
Step 15
a
c
b
Use 4x30mm Screws to fix
each beading strip onto the
door gable. Ensure that the
screw is parallel with the
door frame when fixing the
strip to the door gable as
shown in the close up view.
Attatch the turn button to
the top and bottom door
blocks with 1x30mm screw
for each one.
First line up the door blocks
on top of the framing of the
doors. Then fix with
2x30mm screws by screwing
through the matchboard
door into the block.
8x30mm Screws
2x30mm Black Screws
6x30mm Screws
b
c
a
12
24
17
30mm
screw
Pre drill
hole
30mm
screw
b
a
15
14
24
Step 16
Fix the door strips to the
master door using 5x30mm
screws.
If the strips are attatched to
the slave door the doors will
not open properly.
5x30mm Screws
a
Use 1x30mm screw to
secure the turn button to
the master door.
These turn buttons help to
keep your doors straight
during high and low
moisture levels in the
atmosphere.
1x30mm Black Screws
b
30mm
screw
Pre drill
hole
30mm
screw
Summary of Contents for 01PTOSBA1008DDFW-V2
Page 10: ...P 18 ...
