Attatch the tower bolts to
the top and bottom door
blocks with 6x30mm screw
for each one.
First line up the door blocks
on top of the framing of the
doors. Then fix with
2x50mm screws by screwing
through the matchboard
door into the block.
12x30mm Black Screws
4x50mm Screws
b
a
c
Step 18
Step 19
20
28
30mm
16mm
Opening Window
Fixed Window
30mm
screw
30mm
screw
16mm
screw
30mm
screw
23
If you would like the windows to be
opening use the butt hinges to
attach the opening window strip
and the opening window together.
Use 30mm screws to fix the butt
hinge to the Window Strip and
16mm screws to fix it to the
Opening Window.
If you want to fix the opening
windows, instead of fixing butt
hinges to the opening window,
use 4x30mm screws to attach
the opening windows to the
window panel as shown in the
diagram.
6x30mm Screws
6x16mm Screws
4x30mm Screws
Place the cover strip 11mm above the
window gap in the window panel and
fix with 3x30mm screws per strip.
Measure and trim before fitting.
3x30mm Screws
*SCREW COUNT PER WINDOW
*Cut down trims to fit
26
14
27
27
a
b
