P 4
Please retain product label and instructions for future reference
Step 7
When attaching the swing arm to your
playhouse pre-drill the holes with an
8mm wood drill bit before inserting the
screws. This will prevent the wood from
splitting. Drill through the swing arm
upright and into the framing of the
playhouse you want the swing to be
attached to.
When positioning the screws we advise
the top screw is fixed as close to the top
of the frame on the playhouse you are
attaching the swing arm to. Similarly fix
the bottom screw as close to the end as
possible. Ensure the middle two screws
are equally spaced.
4x150mm screws
150mm
screw
*Playhouse used for illustration purposes only*
Step 8
To attach the swing seat to the swing arm
simply push the ring at the upper most
part of the swing rope through the hook
as shown. Repeat this for both clips.
Ensure that both catches are closed prior
to use.
The swing seat must be adjusted so that
it is at least 350mm from the ground.
350mm
8
*Playhouse used for illustration purposes only*
