P 11
Please retain product label and instructions for future reference
Step 21
Parts needed - No. 8 QTY 1
No. 9 QTY 1
No. 10 QTY 1
Place the remaining of roof
panels
(No. 8, 9 & 10)
(previ-
ously assembles in Step 13) on
to the Summer House using the
same method mentioned in the
previous step.
**Pull the corners together by
the framing**
8
10
9
Step 22
Parts needed - No. 15 QTY 5
Secure the Roof bearer B’s
(No.
15)
underneath Roof bearer A
(No. 14)
using 2x60mm screws
per bearer through the previ-
ously drilled holes (in Step 15)
up into the roof panels. Make
sure that the Roof bearer B
(No.
15)
parts fit evenly under the
framing of the roof panels and
that the pointed corners meet
the line that was drawn in a Step
16.
The underside of the roof should
look as shown.
10x60mm Screws
Pre drill
hole
60mm
screw
15
15
15
15
15
Step 23
Once all four roof sides are on the
building, pull the corners together and
secure underneath the roof as shown. Fix
using 3x50mm screws per join.
The Roof bearers may need to be
unscrewed and repositioned to ensure all
the roof panels sit level with each other.
*Roof panels will support each other if
bearers are unscrewed.
Once the panels are secure,
re-screw the bearers if neccessary, and
secure the five Roof Bearers B
(No. 15)
through their centres together with the
Roof Bearer A using 5x70mm screw.
12x50mm Screws
5x70mm Screws
Pre drill
hole
50mm
screw
70mm
screw
15
15
A
B
A
B
